5 of my 12 Newtek NDI PTZ2&3 Cameras are reachable via web UI but aren't discoverable in Studio Monitor or Tricaster 2 Elite unless added as external sources via Access Manager. Began after enabling IGMP Snooping and switching cams to multicast. I removed the multicast setting and same issue persists. Since adding them with Access Manager, randomly some of the 5 cams won't pop up in assigned inputs upon tricaster start up. I have to reassign them to the input. What could be causing these issues?
Have to use Access Manger to add some of my cams to Tricaster 2 Elite and Studio monitor on any device. I can access cams via
by Jeremy Amado - Number of replies: 1
In reply to Jeremy Amado
Re: Have to use Access Manger to add some of my cams to Tricaster 2 Elite and Studio monitor on any device. I can access cams via
by Kane Peterson -I've seen some switches with IGMP snooping enabled have mDNS discovery issues, try turning that off and see if they come back.
Otherwise, using External Sources or Discovery Server are valid solutions.
Otherwise, using External Sources or Discovery Server are valid solutions.
