In NDI interface, the bridge gives an error in the PORT section for connecting to other devices and gives an exclamation mark. Help me solve this. I connected it as PC LAN and Wi-Fi.
The IP listed in Bridge is it is trying to determine your public IP address, but really it doesn't matter what IP is listed as Bridge will be binded to all IP addresses available on your computer.
As for the port test, this occurs with an external service to help determine if the port is open. But there are factors that might prevent this test from completing successfully (and some of the reason for it failing can be out of your control). Before you spend lots of time just trying to get the exclamation mark go away, if you think things are setup correctly for port forwarding, give it a try and see if it works.
As for the port test, this occurs with an external service to help determine if the port is open. But there are factors that might prevent this test from completing successfully (and some of the reason for it failing can be out of your control). Before you spend lots of time just trying to get the exclamation mark go away, if you think things are setup correctly for port forwarding, give it a try and see if it works.
